Nils Wenning - RUUX Blog

RUUX Blog

Sign in Subscribe

Nils Wenning

FPGA Microphone Array: Part 2 Distance Detection

FPGA Microphone Array: Part 2 Distance Detection

This article is a presentation of an FPGA design and a demonstration of how distance measurement was achieved. Chapter 1: Programming the Modules Transmitter Module There are two main modules that need to be programmed: the Transmitter module and the Receiver module. The discussion will begin with the transmitter module.

FPGA Microphone Array: Part 1 Hardware

FPGA Microphone Array: Part 1 Hardware

Hi there, Long time no see, but I'm back with a new project: An ultrasonic microphone array running on a PYNQ FPGA. Additionally, I tried to make an Ultrasonic Phase Array, but spoilers: it didn't work well, so I'm just going to go briefly over this topic. In this part,

Rust on STM32

Hi all, in this short tutorial I want to show you how I get a blinking LED on an NUCLEO-F411RE which uses the STM32F411RE chip. I got some trouble to getting all the necessary steps together, so I would like to collect them in this blog post. I compile on

Tang Nano 9k Softcore Blink, Fast Method

Tang Nano 9k Softcore Blink, Fast Method

Hey everyone :) This is a quick follow up on the previous Tutorial. As you may have noticed, changing the program is a bit difficult. So, I discovered how to use the User Flash to use it as the Flash for the Soft core MCU. But on the downside, I only

Tang Nano 9k Softcore Blink, Merging Method

Tang Nano 9k Softcore Blink, Merging Method

Hey and welcome to my first Tutorial Blog post. The goal is to Blink the LEDs via an integrated soft core Processor. In this part, we do that by combining the Hardware Design and the MCU program and flashing the packet to the SRAM of the Tang Nano 9k. 💡You

Hi There :)

Welcome to my new blog about electronics and programming. If you like to tinker and hack like I do, you've come to the right place. About me I started hacking and hardware tinkering at a young age. After my apprenticeship as an industrial electronics engineer at Siemens, I'm now studying